一、基本信息

华侨大学发光材料与信息显示研究院讲师，材料科学与工程学院讲师，邮箱：jinxinyang@hqu.edu.cn

二、教育和工作经历

2021/7-至今 华侨大学发光材料与信息显示研究院/材料科学与工程学院 讲师

2016/9-2021/3  英国曼彻斯特大学 (The University of Manchester) 博士

2015/9-2016/6  英国曼彻斯特大学 (The University of Manchester) 硕士

2011/8-2015/7  哈尔滨工业大学 学士

三、研究方向

基于印刷二维材料与器件的研究，具体包括以下方向：

1) 喷墨打印点、线在小尺度下的稳定性

2) 印刷高效稳定钙钛矿太阳能电池

3) 柔性印刷电子器件

四、代表性论文

1. Tan, L.; Shen, L.; Song, P.; Luo, Y.; Zheng, L.; Tian, C.; Xie, L.; Yang, J.*; Wei, Z.* Pure Chloride 2D/3D Heterostructure Passivation for Efficient and Stable Perovskite Solar Cells. Adv. Energy Sustainability Res. 2023, 4, 2200189.

2. Lim, E. L.; Yang, J.; Wei, Z.* Inorganic CsPbI2Br halide perovskites: from fundamentals to solar cell optimizations. Energy Environ. Sci. 2023, 16, 862-888.

3. Yang, J; He, P; Derby, B*. Stability Bounds for Micron Scale Ag Conductor Lines Produced by Electrohydrodynamic Inkjet Printing. ACS Appl. Mater. Interfaces 2022, 14, 39601-39609.

4. Yang, J; Lim, E L; Tan, L; Wei, Z*. Ink Engineering in Blade‐Coating Large‐Area Perovskite Solar Cells. Adv. Energy Mater. 2022, 12, 2200975

5. Yang J, Zheng F, Derby B*. Stability of Lines with Zero Receding Contact Angle Produced by Inkjet Printing at Small Drop Volume. Langmuir, 2021, 37(1): 26-34.

6. Ding H, He P*, Yang J, Liu C, Zhao H, Derby B. Water-based highly conductive graphene inks for fully printed humidity sensors. Journal of Physics D: Applied Physics, 2020, 53(45): 455304.

7. He P, Brent J R, Ding H, Yang J, Lewis D J, O'Brien P, Derby B*. Fully printed high performance humidity sensors based on two-dimensional materials. Nanoscale, 2018, 10(12): 5599-5606.

8. Yang J*, Yang Y, Balaskas A, Curioni, M. Development of a chromium-free post-anodizing treatment based on 2-mercaptobenzothiazole for corrosion protection of AA2024T3. Journal of The Electrochemical Society, 2017, 164(7): C376